Gas Door Cover Install
This page is for detailed instructions on how to install the Gas Door Cover Decals. If you are looking for instructions on a different product, go here.
CERAMIC COATED CARS: Please understand that your ceramic coating will reduce the vinyl's ability to stick to your car, and may lead to easy peeling or pulling away. It is strongly recommended that you first remove the ceramic coating in the areas your wish to put the vinyl on, then once the vinyl is installed and has had time to fully set in, re-apply the ceramic coating to the area.
NOTE: If you are not familiar with vinyl decal or car wrap installation, we strongly recommend professional installation to reduce the risk for error or mistakes. We understand that mistakes happen. While mistakes in installation are not covered in our returns policy, if you should slip up and need some replacement pieces, please reach out to us via email: support@mustangrestyled.com and we will do everything we can to get you just the replacement pieces you need at a reduced price.
Gas Door Cover
- One of the easiest installs, in my opinion. Align things so that there is just a 1/8 inch overlap of vinyl on all sides.
- When you are ready to wrap the edges, go slowly in small inch sections at a time, applying a few seconds of heat, then rolling your finger over the edge to avoid making any creases. If it creases, gently pull it back up, heat it up for a second again, and roll carefully back over with your thumb.
- Final product
